Installation and Reference Guide
10G SFP+ Modules
Model
Module
Type
Connector
Type
Copper
Cable
Length
(M)
Conductor
Wire
Diameter
(AWG)
Data Rate
(Gb/s)
DDM
Supported
(Yes/No)
XG-SFP-CU1M
Passive
SFP+
1
28
10.3125
No
XG-SFP-CU3M
Passive
SFP+
3
28
10.3125
No
XG-SFP-CU5M
Passive
SFP+
5
26
10.3125
No
XG-SFP-AOC1M
Active
SFP+
1
\
10.3125
Yes
XG-SFP-AOC3M
Active
SFP+
3
\
10.3125
Yes
XG-SFP-AOC5M
Active
SFP+
5
\
10.3125
Yes
XG-SFP-AOC10M
Active
SFP+
10
\
10.3125
Yes
The types/models of the SFP+ modules are being updated. If more accurate models of the module are
required, please contact Ruijie marketing staff or technical support engineers.
Additional connecting cables are not needed. You just need to plug the cable ends into the appropriate
device ports for interconnection.
The TX power of AOC cable can be displayed as “N/A”
Table 3-4 Temperature/Humidity Requirements of 10G SFP+ Modules
Application
Commercial-Specific
Industrial-Specific
Operating Temperature
0ºC to 70ºC
-40ºC-85ºC
Storage Temperature
-40ºC to 85ºC
-40ºC-85ºC
Relative Humidity
10% to 90%
10%-90%
Module Specifications
Wavelength
Wavelength means the optical wave band for transmission of light signal. Currently, the commonly used SFP optical
modules have three central wavelengths: 850 nm, 1310 nm and 1550 nm. Usually, the wave band of 850 nm is for
short-distance transmission and the wave bands of 1310 nm and 1550 nm are for long-distance transmission.
Optical Fiber Type
Optical fibers are classified into two types: single-mode and multimode fibers according to the transmission mode of light
in fibers.
A multimode fiber (MMF) has a larger core and transmits light of various modes. But it has a higher modal dispersion. The
modal dispersion grows with the increase of transmission distance. The transmission distance of multimode fibers is
associated with the transmission rate, core diameter, and modal bandwidth.
