Ruijie Networks RG-S6200 Series, Installation Manual

Page: 11 / 41

Indicator Definition Status Meaning
connected to the AC terminal.
Solid green The power supply is working normally.
Solid yellow It indicates:
A. The working environment temperature of the
power supply exceeds the normal
temperature range.
B. The power supply is not matched correctly.
Solid red Power supply fault (any fault).
Off It indicates:
A. The power supply is not in position.
B. The power supply is in position but not
connected to the AC terminal.
Solid green The power supply is working normally.
Solid yellow It indicates:
A. The working environment temperature of the
power supply exceeds the normal
temperature range.
B. The power supply is not matched correctly.
PWR2
Indicates the power
module status.
Solid red Power supply fault (any fault).
Solid green Gigabit Link.
Blinking green Gigabit ACT.
Solid yellow 10/100M Link
MGMT
Indicates the external
management port
Blinking yellow 10/100M ACT
Solid green The fans are in position and are working
normally.
Solid yellow It indicates:
A. One fan is not in position or in the
powered-off status.
FAN
Indicates the fan
status.
Solid red It indicates:
A. Any fan in the system is faulty.
B. Two or more than two fans are not in
position or in the powered-off status.
C. The fan type is configured incorrectly
Solid green It indicates:
A. Port link is up.
B. Data is transmitted on the port.
Link/ACT indicator
Indicates the port
status.
Off Port link is not up.
1.5 Module Types Supported by the RG-S6200Series Switches
The RG-S6200 series switch supports the following modules:
1. M6200-16XS extension module, which is used to support the extension for the RG-6200 series switch.