Ruijie Networks RG-AP520-I(G2) Series, Hardware Installation And Reference Manual, Page: 8 / 31

·
Blinking orange 3Hz Firmware upgrade in progress. Do not power off.
Solid blue N/A Normal operation, but no wireless clients are associated with the AP.
Breathing blue 16 breaths/min Normal operation, at least one wireless client is associated with the AP.
Solid red N/A Warnings(defined by software)
Double blinking
red
3Hz (on and off for
2 cycles
alternately)
Locate AP.
Figure 1-2
Note 1. 1000BASE-T/100BASE-TX/10BASE-T self-adaptive Ethernet port (PoE-capable)
Power Sources
The AP can be powered either with a 48V DC power adapter or through Power over Ethernet (PoE).
The AP requires Ruijie power adapters (If needed, you can buy them from Ruijie).
To use a PoE device, make sure it supports the IEEE 802.3af/at PoE standard.
Cooling Solution
The AP adopts fanless design.
Leave sufficient space at the surrounding of the AP when place the AP to permit airflow for proper ventilation.