Ruijie Networks RG-AP520-I(G2) Series, Hardware Installation And Reference Manual, Page: 18 / 31

·
2) Align the square feet on the rear of the AP over the mounting holes on the bracket. See Figure 3-5.
Figure 3-5 Aligning the Square Feet with the Mounting Holes
Before mounting the AP on the bracket, you must first install the Ethernet cables.
3) Slide the AP into the holes until it clicks into place. See Figure 3-6.
Figure 3-6 Mounting the AP on the Bracket
When mounting the AP on the wall, keep the logo of Ruijie point upward.
The square feet should fit easily into the mounting slots. Do not forcibly push the AP into the slots.
After installation, verify that the AP is securely fastened.
Securing the Access Point
1) Press the button and insert the lock hasp into the lock slot on the back of the bracket.
Figure 3-1 Inserting Lock Hasp into the Slot