RDC7132G User manual V1.0
SHENZHEN RUIDA TECHNOLOGY
29
Press "FN" to move the light blue light to the corresponding modification item. Press "X+/-" and
"Y+/-" to modify the parameters. After modification, press "ok" to save the parameters
.
4.3.11
diagnose
Press ok when the light blue cursor is over the item, and the following dialog box pops up
：
The interface displays the system's hardware IO port information. Press "read parameter" to read the
system's hardware information. When the hardware signal is triggered, the small box on the left of the
corresponding will display green, otherwise it is gray
.
4.3-8
4.3-9
