Miknetum MPR 400
11
Make sure when mounting (or adjusting) the tumbling
arm, mixing arm (alternative blind plug), standard trolley
support as well as the chain on it that the pertaining lock-
ing pins are correctly locked!
No person may stand in the swivel range of the lid!
The operator must make sure that no persons, who do not
know the hazards of the machine or cannot anticipate
them, are about in the area of the machine!
If the drum is inclined downwards and you aerate the
drum or even open the lid, the goods will fall out of the
machine.
Each time before you start working, make sure that the lid
seal has been inserted correctly. For this, check during
program start whether a pressure loss is indicated on the
pressure display (if the machine can create a vacuum). If
this is the case, the gasket has been mounted correctly.
Otherwise check the gasket.
Please refer to the short instructions supplied with your
machine regarding the manual operation of the manual
switch control.
The lid cannot be opened when there is a vacuum in the
machine or if it has not yet been fully aerated.
If you interrupt a program by pressing
“
Pause
”
, you will be
prompted to aerate when
“
Open lid
”
is actuated. Only af-
ter the drum has been evacuated will you be able to open
the lid by actuating it again.
You can aerate the machine in a program.
The drum can be set to any position between 30° and
102° (= discharging position) so that it can be used for
any operating process.
The tablet PC may only be operated by touching it with
the fingers. Using any objects (e.g. blade) is prohibited!
