PM-311 User Manual
18 |
to be used.
-- Make sure the socket and any extension cord(s) you use can support
the total current load of all the connected devices.
-- Remove all power from the device prior to installing or removing any
accessories, hardware, or cables
-- Before cleaning the system, make sure it is disconnected from
any external power supplies (i.e. AC adapter).
2.2.3. Starting Your System
The Power/Resume button is found on the right side of the Tablet PC. Press the Power/Resume button
to start your system and check that if the Power LED turns on.
After a few seconds, the system’s display will turn on and your system will begin to execute the Power
on Self Test or POST to check if all system components are running properly. Any error found during the
test will be displayed on the screen.
After the test, the screen will also display a message "
press <F2> to enter SETUP
". You don’t need to
run this program at the moment as your dealer already made the necessary settings for your computer
optimal operation.
After the test has completed, your computer will start to search and boot up the operating system from
your hard drive.
2.2.4. Connecting the keyboard and mouse
Before setting up the system, please make sure the following items are available.
Keyboard
Mouse (for system software installation)
A keyboard is an input device; a mouse is a pointing device. Please connect these two devices as graphics shown
below to interact with your system.
