RuggedCom RuggedMC RMC30 User Manual Download Page 83

Page: 83 / 138

2. Serial Protocols

ROS® v3.11User Guide

RMC30

The number of transmitted characters.

Rx Packets

Synopsis: 0 to 4294967295

The number of received packets.

Tx Packets

Synopsis: 0 to 4294967295

The number of transmitted packets.

Packet Errors

Synopsis: 0 to 4294967295

The number of packets received from this port and discarded (error in protocol, CRC or
routing information not found).

Parity Errors

Synopsis: 0 to 4294967295

The number of Parity Errors.

Framing Errors

Synopsis: 0 to 4294967295

The number of Framing Errors.

Overrun Errors

Synopsis: 0 to 4294967295

The number of Overrun Errors.

2.4.4. Clearing Serial Port Statistics

Figure 2.37. Clear Serial Port Statistics Form

This command clears statistics on one or more serial ports. To clear statistics for one or more
ports, check the boxes corresponding to the selected ports and select "Apply".

Summary of Contents for RuggedMC RMC30











































































































































Search results

Summary of Contents for RuggedMC RMC30

Reviews:

Related manuals for RuggedMC RMC30

Brands by name

Popular brands

RuggedCom RuggedMC RMC30, User Manual

Search results

Summary of Contents for RuggedMC RMC30

Reviews:

Related manuals for RuggedMC RMC30

Brands by name

Popular brands