RuggedCom RuggedMC RMC30 User Manual Download Page 81

Page: 81 / 138

2. Serial Protocols

ROS® v3.11User Guide

RMC30

Protocol

Synopsis: { None, RawSocket, ModbusServer, ModbusClient, DNP,

WIN, TIN, MicroLok }

The serial protocol supported by devices that create this link.

Local Address

Synopsis: Any 27 characters

The address of the device connected to the serial port on this device.

Remote Address

Synopsis: Any 35 characters

The address of the device connected to the remote host's serial port.

Rx Local

Synopsis: 0 to 4294967295

The number of packets received from the local address that were forwarded to the remote
side.

Rx Remote

Synopsis: 0 to 4294967295

The number of packets received from the local address that were forwarded to the local
serial port.

Erroneous

Synopsis: 0 to 4294967295

The number of erroneous packets received from the remote address.

2.4.2. Connection Statistics

This table presents statistics for all active TCP connections on serial protocols. The statistics
are updated once every second.

Figure 2.35. Connection Statistics Table

Remote IP

Synopsis: ###.###.###.### where ### ranges from 0 to 255

Summary of Contents for RuggedMC RMC30











































































































































Search results

Summary of Contents for RuggedMC RMC30

Reviews:

Related manuals for RuggedMC RMC30

Brands by name

Popular brands

RuggedCom RuggedMC RMC30, User Manual

Search results

Summary of Contents for RuggedMC RMC30

Reviews:

Related manuals for RuggedMC RMC30

Brands by name

Popular brands