58
System Setup
©
Rugged Science
Cortex vX
Embedded System Series User Manual
Find the HDD bracket
on
the back of the
“Pet-Door”,
(consists of 4
M3 screws and
HDD thermal pad
in the
accessory box.
)
Step3.
Place the HDD into the bracket
and gently push it down to
make it contact with thermal
pad.
Use
a
Philips
screwdriver to
tighten
the
HDD with M3 screws. Please
note that the HDD must be
placed
in
the
proper
orientation
as below.
Step4.
Pull out the SATA cable
inside the chassis and
connect it to
the
HDD.
Step5.
SATA Connector of HDD
Summary of Contents for Cortex vX series
