Copyright © 2019 Omix-Ada
®
, Inc.
460 HORIZON DR. | SUWANEE, GA 30024 | PHONE: 770-614-6101 | FAX: 844-270-0593 | www.Omix-ADA.com
Rugged Ridge Dash Multi Mount System with Charger, JK 2007-2010
Page 3/3
Part #13551.33
Step 4
Place outer ring over end of ball mount.
Step 5
Press phone mount into ball mount.
Note:
Image shown here is the non-charging base,
the charging base mounts in the same manner.
Step 6
Pull outer ring over phone mount adapter and
thread tightly to secure.
Step 7
Route power cord from charging base to a USB
power port. If you choose to use the powered duel
USB port provided then install in a precut switch pod
or cut a provision to install. When wiring power to the
USB port make sure to include in-line fuse.
