22
23
Advanced Functions
In standby mode, press [ ] for 2 seconds to lock or unlock the keypad. [ ] will be displayed at
the top of the LCD when keypad is locked.
1) Keypad Lock Settings
3) FM Radio Function
On/Off Radio Receiver
In standby mode, press [ ] to open FM radio function. LCD will display "76.00."
Pressing [ ] again will exit FM radio mode.
Mode Selection
In FM radio mode, press [ ] to switch between FM memory mode and FM frequency mode.
Note: This function is unavailable when there are no FM memory channels.
Frequency Selecting
In FM frequency or memory mode, input digits directly by keypad or press [ ] or [ ] to
choose the desired frequency or stored FM channel.
FM Radio Search
In FM radio mode, press [ ] + [ ], then press [ ] again to enter FM
radio scanning. On the "RADIO" screen, press [ ] or [ ] to change scanning
direction. The radio will stop scanning when a frequency is available and then exits.
FM Radio Storage
In FM frequency mode, press [ ] and then press[ ]. The channel number for storage
will blink at the right of the screen. Press [ ] or [ ] or use number key to select the desired
channel number and press [ ] to confirm.
FM Radio Channel Delete
In FM memory mode, turn off the radio. Press [ ] to turn on the radio. "DEL ?"
will appear on the screen and the channel number will blink. Press [ ] or [ ]
to choose the channel number you wish to delete, then press [ ] to confirm.
Note: In FM radio mode, if a signal is received, the radio will exit FM mode. The radio will return
to FM mode 5 seconds after signal ends.
To access a repeater, press and hold the [ ] key for the amount of time specified by the
repeater. The transmitter will automatically be activated, and a 1750Hz audio tone will be
superimposed on the carrier. Once access to the repeater has been gained, you may release the
[ ] key and use PTT for activating transmission.
2) Tone Calling (1750Hz Tone)
Summary of Contents for GMR5-M
Page 1: ...GMR5 M P N GMR5 M...
