SkyPods
Order and Installation Manual:
Installation
SkyPods
–
Section 3 - Installation
© Rugged Interactive
2019
SkyPods Installation
SkyPods should be mounted onto a wall using the three 6 mm mounting points on each SkyPod and the
supplied nylon stand-offs between the edge of each SkyPod and the mounting wall. Use suitable and safe
head screws or bolts to mount the SkyPods (not supplied).
Figure 3.4.1
shows a typical SkyPod
installation.
Figure 3.4.1:
Typical SkyPod Installation
It is firmly recommended that the units are installed onto a wall that projects forward at least 0.3 m
over the edge of the trampoline. This ensures that users land in the middle of the trampoline bed.
NOTE:
Please use good practice when running data cables to and from products, external pods and
sensors. Support long cables at least every 50 cm and provide adequate strain relief for connection points.
Nylon stand-off
SkyPod
Plywood
Thick foam wall
Hole cut into the
foam and plywood for
the cable to reach
through.
CAT5 cable
(Be careful not pinch
or trap cable.)
Screw