manualshive.com logo in svg

Rugged Computing IA80, User Manual, Page: 73 / 85

Share
Download
Rugged Computing IA80 User Manual Download Page 73

Rugged Computing       

Users Manual                                                   Rugged Table PCs 

73

5.8 Touch Driver Installation 

 

                                                                 

TouchKit is the Premier Touch software, which contains drivers of the touch 
panel controllers for the specified communication connectors, RS232, PS/2 
and USB, and the other two utilities. 
The two utilities are as follows: 

„

 Touch 

Tray 

support 

This is utility for emulating the right and left button of mouse through 
controlling touch panel. Users can toggle between right or left mouse 
buttons by this utility. 

„

 Configuration 

support 

The calibration and draw test of touch panel are done by this utility. 
Besides, users can add or remove for new RS-232 or PS/2 touch 
panel devices. 

Follow these steps to install TouchKit. 

 

Step.1 

Insert the Driver Utility CD. Open the file document “

h_ TouchKit

” to execute the setup. 

 

 
Step.2 

Click on “Setup.exe” to execute the setup. 

 

Summary of Contents for IA80






















































































Reviews:

No comments