Rugged CCTV Night Scout TVI Page 2 Instruction Manual Download

Page: 2 / 52

R PTZ C

2/52

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT OPEN THE COVERS.

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONAL

This lightning flash with arrowhead symbol is intended to alert the user to

the presence of un-insulated "dangerous voltage" within the product's

enclosure that may be of sufficient magnitude to constitute a risk of electric

shock to persons.

This exclamation point symbol is intended to alert the user to the presence

of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

This Device compiles with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:
(1) This device may not cause harmful interface, and
(2) This device must accept any interference received, including

interference that may cause undesired operations.

Summary of Contents for Night Scout TVI





















































Search results

Summary of Contents for Night Scout TVI

Reviews:

Related manuals for Night Scout TVI

Brands by name

Popular brands

Rugged CCTV Night Scout TVI, Instruction Manual

Search results

Summary of Contents for Night Scout TVI

Reviews:

Related manuals for Night Scout TVI

Brands by name

Popular brands