1/16" to 3/16
"
(1.6 to
4.8 mm)
Figure 17
Figure 18
8.
Printed Circuit Board
8.1
After removing the printed circuit board (P.C. Board)
bracket assembly from the control enclosure,
separate the P.C. Board from the bracket by cutting
off the plastic spacers (see Figure 9, page 10).
8.2
Reinstall a new factory supplied P.C. Board onto
the mounting bracket, using new non-conducting
spacers of the same length. Spacers are supplied
with a new P.C. Board. Reinstall the control circuit
ground wire to the printed circuit board bracket (see
Figure 18, page 20).
9.
Fuse
9.1
Replace fuse with one of the same type and rating
as indicated on P.C. Board or refer to parts list. An
extra fuse should be stored in the clips marked
“SPARE”.
10.
Cabinet panels
10.1 Bolt-on cabinet panels are individually replaceable.
20
20
R
ep
ai
r a
nd
R
ep
la
cem
en
t
Summary of Contents for FX5 Series
Page 21: ...NOTES ...
Page 43: ...NOTES REMARQUES ...
