background image

2

PSA VRS/INOX M12

Before every use, please read the Safety

Instruction of the PSA-Fall protection 

anchorage point (PSA-VRS / PSA INOX 

STAR M12) carefully and make sure that 

you understand all substance. 

Improper use ore care of this eyebolt can 

result in bodily injury or property damage 

and eliminates any warranty!

1  Application and warning information

WARNING 

Improper assembled or damaged fall pro-

tection anchorage points and inappropriate 

use can result in deadly injury or lead to 

heavy injuries when load drops.

Inspect fall protection anchorage points 

before each use carefully!

•  PSA-VRS and PSA INOX STAR M12 must only 

be used by competent and trained people with 

adequate  knowledge,  and  outside  Germany  the 

corresponding country specific requirements must 

be utilised.

•  PSA-VRS M12 is not suitable for permanent 

outdoor use. Changing weather conditions can 

cause corrosion and wear of material. 

•  The user of the PSA-Fall protection anchorage 

point must be in good health to use this equipment. 

The hereby necessary certification can f.e. be ve

-

rified by a G41-checkup.

•  The PSA-Fall protection anchorage points must 

only be loaded with the stated number of persons.

•  To enable safety and appropriate information for 

all users in case of a resell to another country, the 

reseller must provide the user instruction, mainte

-

nance instruction for the regular inspection and the 

repairing in the country specific language.

2  Intended use of PSA-VRS and  

PSA INOX STAR

PSA-VRS and PSA INOX STAR M12 eyebolt can be 

used as anchor point, for fall protection harnesses. 

This anchor point (subsequently named PSA-Fall 

protection anchorage point) can also be attached per-

manent to a building, so that a fall protection harness 

can be hooked in. 
PSA-Fall protection anchorage points must only 

be used as fall arrest equipment (and not for lifting 

purposes).
PSA-Fall protection anchorage points 

are not desi-

gned to be used for permanent swiveling under 

load,

 because they can turn loose when turned under 

load. Please observe the following WLL: 

PSA-VRS M12 and PSA INOX STAR M12 are per-

missible for max.1 Person.

RUD-PSA (lifting points) fixing points are able to take 

all possible occurring forces in any loading directions 

if used in the intended way as fall arrest protection 

devices.

PSA-VRS M12 is not suitable for permanent outdoor 

use. Changing weather conditions can cause corro-

sion and wear of material. 
In consequence of the assembly method this product 

fulfills the requirements as described in DIN EN 795 

paragraph 3.2.1: 

Fall protection anchorage device type A

Fall protection anchorage device which includes when 

installed, either one or multiple stationary anchor 

point(s) and if for their fixing at the structural facility 

a stationary installed anchor point or a fixing element 

is necessary.
The PSA-VRS eyebolt and the PSA INOX STAR 

M12 must only be used for the in the user instruction 

specified purposes.

3  Installation information

3.1  General information

•  Capability of temperature usage: 

 

The PSA-Fall protection anchorage points PSA-

VRS and PSA INOX STAR M12 can be used in 

the temperature range between -40°C up to 280°C.

•  RUD PSA-Fall protection anchorage points must 

not  be  used  under  chemical  influences  such  as 

acids, alkaline solutions and vapours. Please ob

-

serve chapter 2, Intended use of 

PSA-VRS and 

PSA INOX STAR.

•  Pay attention during transport and storage of the 

PSA fall arrest anchor point that the thread will not 

be damaged.

HINT

The bolt is hold captive in the housing by 

4 compressions (indentations)

•  A plan must exist to accomplish rescue actions, in-

cluding all kinds of possible emergencies occurring 

with the work.

•  If the PSA-Fall protection anchorage point is used 

in mobile applications, it must be handed out to the 

user personally.

•  Modifications or repairing on the PSA-Fall protec

-

tion anchorage points must be carried out by the 

manufacturer only.

•  Store fall protection eyebolt at dry and non-corro-

sive environment only. 

  Correct maintenance and storage are important for 

the safety of the worker.

Summary of Contents for PSA-VRS







Reviews: