Ruckus Wireless ZoneFlex series, Installation Manual, Page: 40 / 68

34
Preparing the 7781CM at the Depot and Shipping to the Field
Configuring the AP for Management by FlexMaster or for Standalone Operation
NOTE: You can also configure other wireless settings on this and other Wireless # tabs
(in addition to the settings described above), although it is not necessary for completing
the AP installation.
5. Click Update Settings . You have completed configuring the basic wireless settings of
the AP.
6. If you are configuring the AP for management by FlexMaster, then continue with
“Setting the FlexMaster Server Address (Optional)” on page 34. If you are configuring
the AP for standalone operation, then continue with “Verifying AP Operation” on
page 36.
Setting the FlexMaster Server Address (Optional)
When you have a FlexMaster server installed on the network and you intend to use
FlexMaster to manage the AP, you can set the FlexMaster server address at this point.
Before starting this procedure, make sure you obtain the correct FlexMaster server URL.
NOTE: In addition to setting the FlexMaster server URL manually on the AP, you can also
use DHCP Option 43 or DNS to point the AP to the FlexMaster server. For more
information, refer to the
FlexMaster User Guide .
1. On the menu, click Administration > Management .
2. Scroll down the page to the TR069 / SNMP Management Choice section ( Figure 21 ).