Ruckus Wireless ZoneFlex 901-T504-US31, Installation Manual

Page: 29 / 52

T504 AP Installation Guide, 800-71032-001 Rev D
Installing the T504
Deploying the T504
29
There are two tables on the
Software Status
page ---
Information
and
Status
. Table 7 and Table 8
describe the information that these tables display.
Table 7. Information (software) table
Item Description
Standard Specification
Compliant The standard with which the device is compliant.
Hardware Version The version of the cable modem hardware.
Software Version The version of the cable modem software.
Cable Modem MAC Address The MAC address of the cable modem.
Cable Modem Serial Number The serial number of the cable modem.
CM Certificate Indicates whether a security certificate is installed.
Table 8. Status table
Item Description
System Up Time Indicates the time that has elapsed since the cable modem was
last rebooted.
Network Access Indicates whether or not the cable modem is connected to the
network.
Cable Modem IP Address The IP address assigned to the CM.
Continue with Viewing the Connection Status .
Viewing the Connection Status
The Connection Status page displays information about the cable modem’s Hybrid Fiber Coax (HFC)
and IP network connectivity, including its downstream and upstream channels and the IP address
that is currently assigned to the cable modem.
1 Log into to the Status page as described in Logging Into the CM Web Interface .
2 Click Connection in the left sidebar. The CM Web interface displays the Connection Status page.
NOTE
The Downstream Power indicated in the Power column is accurate to +/-3dB.
Figure 10. Connection Status page - Page 1 of 2