page 10 of 18
Step 6: Attach the Mounting Ears to the Rail Assembly
Attach the rack mounting ears to each side of the server using the #10-32 x 3/8 screws.
Figure 7: Attaching the mounting ears
Step 7: Slide the Rail Assembly into the Outer Rails and
Secure to the Rack
Align the inner rails (attached to the server chassis) with the outer rail assemblies
1.
(attached to the rack).
Engage the matching rails, and then slide the server chassis into the rack until the
2.
two spring safety locks snap into position.
Press down the two spring safety locks (one on each side). See 1 in Figure 8.
3.
Slide the server chassis all the way into the rack. See 2 in Figure 8.
4.
Use the rack screws (#8-32 x 3/4) to secure the chassis and rack handles into the
5.
rack. See 3 in Figure 8.
Figure 8: Securing the server to the rack
Congratulations! You have completed mounting the ZoneDirector 5000 into your server
rack.
