Ruckus Wireless ZoneDirector 1100, Configuration Manual, Page: 5 / 30

VIEW Certified Configuration Guide: Ruckus Wireless
721-1004-000-E.docx
August 2014
5
Handset* models tested: Spectralink 8020/8030
Handset radio mode: 802.11b/g/n 802.11a/n
Meets VIEW minimum call capacity per
AP:** 6 with Wi-Fi Std QoS 8 with Wi-Fi Std QoS
* Spectralink handset models and their OEM derivatives are verified compatible with the WLAN
hardware and software identified in the table. Throughout the remainder of this document they
will be referred to collectively as “Spectralink Wireless Telephones”, “phones” or “handsets”.
The 8440, 8441 (8440 with personal alarm hardware), 8450 (with 1D bar code reader), 8452
(with 1D and 2D bar code reader), and 8453 (8452 with personal alarm hardware) handsets will
be referred to collectively as the 84-Series handsets. The 8741 and 8753 (with 2D bar code
reader) will be referred to collectively as the 87-Series handsets.
** Maximum calls tested per the VIEW Certification Test Plan. The certified product may actually
support a higher number of maximum calls
***WPA2-Enterprise and Wi-Fi Standard QoS are not available for Spectralink 8020/8030
handsets connecting to PBXs using the TDM protocol through a Spectralink Telephony
Gateway (phone type 30 on the 8020/8030).
Known Limitations

ChannelFly and Background scanning should be disabled with Spectralink.

8020/8030 handsets are not compatible with the N-Only AP mode. 84- and 87-series
handsets may be used with the N-Only AP mode.

In the current software release, the Spectralink compatible setting in the AP Group
should NOT be checked. This is scheduled to be corrected in a future version of the
Zone Director software so that the setting changes performed by cli below will not be
necessary.
Spectralink References
All Spectralink support documents are available at http://support.spectralink.com .