34
MM2211 Wireless Broadband Gateway User’s Guide
8000013, December 2006
Configuring the Wireless Interface
8.
When you are finished, click
Update
to save these settings.
9.
Choose the security option—either
Disable
,
WEP
,
WPA-PSK
or
802.1x
.The security configuration
procedure will depend on the option you select.
Configuring the WAN SSID With No Security
Choose Disabled as the security setting then just click
Update
. If a notification that rebooting is required,
follow the instructions.
Configuring the WAN SSID With WEP Security
1.
Select
WEP
in the WAN
Security
drop-down menu.
2.
Click the
Edit Security Settings
button.The WEP Configuration window of
Figure 14
appears.
Country Code
Sets your country or region code. Selecting the incorrect country or
region may result in violation of applicable law. The selectable
countries or regions are United States, Europe, Hong Kong, and
Japan.
N
OTE
–
For MM2211 Gateways shipped in the United States, the
country code cannot be modified. The country code is pre-defined
for
United States
only.
Advanced Settings
This button provides access to the advanced wireless settings.
Advanced wireless settings are for advanced configuration or testing
purposes only.
Changing the advanced settings may negatively affect the operation
of the MM2211 Gateway and is
not recommended
.
Security
The wireless security options are:
•
Disabled
: This setting disables all encryption, so traffic is sent
in the clear. This setting is not recommended.
•
WEP
: This setting enables Wired Equivalent Privacy. WEP
Shared Key authentication and WEP data encryption provides
sufficient security in most cases.
•
WPA-PSK:
Wi-Fi Protected Access, Pre-Shared Key
(WPA-PSK). Each packet of information is encrypted with a
different key. Provides very strong security, but may not be
supported on older systems.
•
WPA-802.1X
: Extensible Authentication Protocol (EAP) using
Tunneled Transport Layer Security (TTLS).
Edit Security Setting
Click this button to edit the security setting of WEP keys or the
WPA-PSK passphrase.
Table 8—Wireless Interface Configuration (Continued)
Field
Description