8000013, December 2006
MM2211 Wireless Broadband Gateway User’s Guide
29
Configuring the MM2211 Gateway
Figure 11—Configuration->System for Remote Management
The default setting is for NUTTCP Server Status to be disabled. If you check
Enabled
, the NUTTCP port
remains open to wait for the request from the service provider. Checking
Oneshot
opens the NUTTCP port
for one stream of data and then closes it.
N
OTE
–
You must enable the default port 5000 and 5001 in a firewall environment for the control and data
port of NUTTCP.