Deutsch
www.ruck.eu
5
Any use of the product other than described in chapter “Intended use” is considered as improper.
The following points are improper and dangerous:
•
Delivery of explosive and flammable media or operation in potentially explosive atmospheres.
•
Delivery of aggressive and abrasive media.
•
Delivery of media containing dust or grease.
•
Installation outside without any protection against the weather.
•
Eine Aufstellung in Feuchträumen.
•
Operation without the duct system.
•
Operation with closed air connections.
2.2. Improper use
Assembly, commissioning, operation, disassembly and service (including maintenance and repair)
require basic mechanical and electrical knowledge, as well as knowledge of the appropriate tech-
nical terms. In order to ensure operating safety, these activities may therefore only be carried out
by qualified technical personnel or a instructed person under the direction and supervision of qua
-
lified personnel. Qualified personnel are those who can recognize possible hazards and institute
the appropriate safety measures due to their professional training, knowledge, and experience, as
well as their understanding of the relevant conditions pertaining to the work to be done. Qualified
personnel must observe the rules relevant to the subject area.
2.3. Personnel qualifications
In this manual, there are safety instructions before the steps whenever there is a danger of perso
-
nal injury or damage to the equipment. The measures described to avoid these hazards must be
observed.
2.4. Safety instructions in this manuel
Safety instructions are set out as follows:
Safety sign (warning triangle)
- Draws attention to the risk.
•
Type of risk
- Identifies the type or source of the hazard.
» Consequences
- Describes what occurs when the safety instructions are not complied with.
→ Precautions
- States how the hazard can be avoided.
General warning!
Indicates possible hazardous situations. Failure to observe the warnings
may result in personal injury and / or damage to property.
Electricity warning (hazardous voltage)!
Indicates possible hazards due to electricity. Failure to observe the war
-
nings may result in death, injury and/or damage to property.
Hot surface warning!
Indicates possible hazards due to high surface temperatures. Failure
to observe the warnings may result in personal injury and/or damage to
property.
Crushing of fingers warning!
Indicates possible hazards due to moving and rotating parts. Failure to
observe the warnings may result in personal injury.
Overhead load warning!
Indicates possible hazards due to overhead loads. Failure to observe the
warnings may result in death, injury and/or damage to property.
Important instructions follow!
Instructions for safe, optimum use of the product.
Safety sign
(warning triangle)
Denotation
