Deutsch
Tel. +49 7930 9211-0 Fax. +49 7930 9211-150
4
1. Important information
This manual contains important information on the safe and appropriate assembly, transport, commissio
-
ning, operation, maintenance, disassembly and simple troubleshooting of the product.
The product has been manufactured according to the accepted rules of current technology.
There is, however, still a danger of personal injury or damage to equipment if the following general safety
instructions and the warnings before the steps contained in these instructions are not complied with.
•
Read these instructions completely and thoroughly before working with the product.
•
Keep these instructions in a location where they are accessible to all users at all times.
•
Always include the operating instructions when you pass the product on to third parties.
1.1. Rules and regulations
1.2. Guarantee and liability
Also observe the generally applicable, legal or otherwise binding regulations of the European or
national legislation and the rules for the prevention of accidents and for environmental protection
applicable in your country.
ruck
products are made to the highest technical standards in accordance with the generally reco
-
gnized rules of the profession. They are subject to constant quality control and meet the relevant
requirements when delivered. Because the products are being constantly developed, we reserve the
right to make changes to the products at any time and without prior announcement. We do not accept
any liability for the correctness or completeness of this installation and operating manual.
The warranty only applies to the delivered configuration. The warranty will not apply if the
product is incorrectly assembled or handled or not used as intended.
2. General safety instructions
2.1. Intended use
•
Exclusively use
ruck
Ventilatoren in good technical order and condition.
•
Check the product for visible defects, for example cracks in the housing or missing rivet, screws and
covers.
•
Only use the product within the performance range provided in the technical data.
•
Protection against contact and being sucked in and safety distances should be provided in accor
-
dance with DIN EN 13857.
•
Generally prescribed electrical and mechanical protection devices are to be provided by the client.
•
Safety components must not be bypassed or put out of operation.
•
The product may be operated by personnel with limited physical, sensory or mental capacities only if
they are supervised or have been instructed by responsible personnel.
•
Children must be kept away from the product!
Planners, plant engineers and operators are responsible for ensuring that the product is installed and
operated correctly.
The
ruck
fan is a component in terms of the machine directive 2006/42/EC (partly completed ma
-
chinery). The product is a not ready-for-use machine in terms of the machine directive. It is intended
exclusively for installation in a machine or in ventilation equipment and installations or for combina
-
tion with other components to form a machinery or installation. The product may be commissioned
only if its integrated in the machinery/system for which it is designed and the machinery/system fully
complies with the EC machinery directive.
Observe the operating conditions and performance
limits specified in the technical data.
ruck
ventilation products can be used to provide:
•
Clean, dry air (no condensation) and non-aggressive gases with a maximum density of 1.2 kg/
m³.
•
The medium and room temperatures and the humidity range given in the technical data and on
the rating plate.
Intended use includes having read and understood these instructions, especially chapter 2
“General safety instructions”.
