Ruck RLI 1200 EC, Assembly And Operating Manual

Page: 4 / 58

English
Tel. +49 7930 9211-0 Fax +49 7930 9211-150 4
CE Declaration of Incorporation
in accordance with the Machinery Directive (2006/42/EC)
The manufacturer
ruck
Ventilatoren GmbH
Max-Planck-Strasse 5
D-97944 Boxberg
Tel.: +49 (0)7930 9211-100
herewith declares that the following product:
Product designation: ROTOLINE
Type designation: RLI 700 FC; RLI 900 FC; RLI 1200 FC;
RLI 1600 FC; RLI 2000 FC; RLI 700 EC;
RLI 1200 EC; RLI 1600 EC; RLI 2000 EC
complies with the basic requirements of the Machinery Directive
(2006/42/EC), Annex I, Sections 1.1.2, 1.1.3, 1.1.5, 1.2.1, 1.3.1,
1.3.2, 1.3.4. and 1.5.1.
The partly completed machine also complies with all requirements
of the Low Voltage Directive (2006/95/EC) and the Electromagnetic
Compatibility Directive (2004/108/EC).
The partly completed machine shall only be taken into service when
it has been established that the machine in which the partly comple-
ted machine is to be installed complies with the requirements of the
Machinery Directive (2006/42/EC).
The following harmonised standards were used:
DIN EN 12100-1 Safety of machinery. Basic concepts, general
principles for design.
Part 1: Basic terminology, methodology.
DIN EN 12100-2 Safety of machinery. Basic concepts, general
principles for design.
Part 2: Technical principles.
DIN EN 60204-1 Safety of Machinery - Electrical Equipment of
Machines, Part 1: General requirements.
The manufacturer undertakes to send the special documentation for
the partly completed machine electronically to the relevant authority
in an individual state on request. The special technical documenta-
tion to Annex VII Part B, which belongs to the machine, has been
prepared.
EC Declaration of Conformity
As required by EC Directive
Electromagnetic Compatibility (EMC) Di-
rective 2004/108/EC
The manufacturer
ruck
Ventilatoren GmbH
Max-Planck-Strasse 5
D-97944 Boxberg
Tel.: +49 (0)7930 9211-100
declares herewith that the following partly completed machines in
their conception and design, and in the versions marketed by us
comply with the requirements of the named EC directives. In the
event of any changes to the partly completed machine not approved
by us, this declaration loses its validity.
Product designation: ROTOLINE
Type designation: RLI 700 FC; RLI 900 FC; RLI 1200 FC;
RLI 1600 FC; RLI 2000 FC; RLI 700 EC;
RLI 1200 EC; RLI 1600 EC; RLI 2000 EC
The following harmonised standards were used:
DIN EN 61000-6-2: 2005 Electromagnetic Compatibility (EMC) -
Part 6-2: Generic standards: Immunity for
industrial environments.
DIN EN 61000-6-3: 2007 Electromagnetic Compatibility (EMC) -
Part 6-3: Generic standards: Emission standard
for residential, commercial and light-industrial
environments.
Responsibility for this declaration rests with:
ruck
Ventilatoren GmbH
Max-Planck-Strasse 5
D-97944 Boxberg
Boxberg, 04.02.2014 Helmut Ortmeier
(Head of Design and Engineering)