English
12
led and dip sWitch functionality
When the Base Station is powered on for the first time or if it has been reset to all default parameters, the LEDs
display in the following sequence:
vdsl connection
For a VDSL connection, when there is power to the Base Station, the green LED 1 [ON] will be lit immediately
and continuously. If the light is not on, please check your connections.
When the Base Station is connected to the system, LEDs 11 [LNK], and 13 [LNK] should be lit continuously, indi-
cating good VDSL and SYNC link. Your installation is OK. (This may take up to five minute.) If the light is not on,
please check your connections.
When the system starts to initialise the LED 2 [ON-AIR] will start to flash. When the whole system is operating
and the Base Station starts to transmit, LED 2 [ON-AIR] will be lit continuously.
ethernet connection
For an Ethernet connection, when there is power to the Base Station, the green LED 1 [ON] will be lit continu-
ously.
If the light is not on, please check your connections.
When the Base Station is connected to the system, LEDs 9 [L/A], and 13 [LNK] should be lit continuously, indi-
cating good Ethernet and SYNC link. LED 9 [L/A] has double function, when packages are sent/received the LED
is flashing. Your installation is OK. (This may take up to five minute.) If the light is not on, please check your
connections.
When the system starts to initialise LED 2 [ON-AIR] will start to flash. When the whole system is operating and
the Base Station starts to transmit, LED 2 [ON-AIR] will be lit continuously.
