English
11
fig. 17:
6)
Insert the RJ-45 plug in the Ethernet port.
Now the installation to the IP network via the
Ethernet port is finished
Wlan card (optional)
for wireless lan functionality
from the Base Station, an RTX-specified WLAN card is an option.
To use a WLAN card:
1)
With the power disconnected, push the WLAN card into the slot at an angle of about 25° (step 1 in
fig. 18
)
and then press the WLAN card down until it locks into place (step 2 in
fig. 18
).
2)
Unless an external antenna is used, the internal antenna should
be connected to the WLAN card (as shown in
fig. 19
).
fig. 18:
fig. 19:
