Software Update
EN-32
Manual | TouchMonitor TM7/TM9
If you want to update your software, please proceed as follows:
1. Copy the update file(s) (*-tm-release-n-n.tgz and/or *-tm-fw-n-n.
bin, n-n: firmware version) into the main directory of a USB stick.
2.
Unmount
the USB stick from the computer system! Not till then
remove it from your computer!
ATTENTION! -
Unmounting from the computer system
shall be performed to avoid damage of the copied update file!
3. Remove the unmounted USB stick from your computer and insert
it to one of the USB ports on the rear panel of the TouchMonitor.
7. Touch the key. The update starts and takes about 10 minutes.
8. When the update is finished, the TouchMonitor reboots auto-
matically.
4. If not visible, touch the empty space of the screen to display the
control bar.
5. Touch the
Menu
key in the right section of the control bar, then
the
System
key in the
Main Menu
.
6. Touch the
Special
key. The additional
Start Firmware Update:
*-tm-release-n-n
resp.
*-tm-fw-n-n
key is displayed.
5.
5.
