Enter Setup
RT
23
0H
Us
er
Gu
id
e
** Exit Setup
26
Chapter 3 Scan Mode
Trigger Mode
If the Trigger Mode is enabled, press the trigger to activate a decode session. The session continues until the
barcode is decoded or decode session timeout expires or the active trigger signal is no longer present. For
good read, the RT230H transmits decoded data via communication port.
Trigger Mode
Decode Session Timeout
This parameter sets the maximum time decode session continues during a scan attempt. It is programmable
in 1ms increments from 0ms to 3,600,000ms. The default setting is 3,000ms. To learn how to program this
parameter, see
Appendix 5
.
Decode Session Timeout
