VLink and VLink LE Control Panel User Manual
Installation and Configuration 7
Bosch Security Systems, Inc.
User Manual
F01U217815 Rev 01
5.
Select the
Always On Top
check box to keep the VLink/VLinkLE Control Panel in front of all other applications.
NOTE:
In the Headset/Primary Audio Device group box, the primary audio input/output device must be selected.
Typically this is a USB headset, however, any audio input and output device can be used.
6.
From the Select Microphone drop down menu, select the
correct audio input device
.
Often, but not always, the Select Microphone and Select Earphone/Speaker drop downs automatically default to the
correct settings.
7.
From the Select Microphone Connector drop down menu, select the
input jack
the audio input device is to use.
Typically this is named Microphone.
8.
Using the Set Microphone Level slider, adjust your
microphone audio level
, if necessary.
NOTE:
If AGC (Automatic Gain Control) is enabled, adjusting this control does not affect the audio level sent to the
Virtual Matrix, however an improper base setting may result in audio distortion.
9.
From the Select Earphone / Speaker drop down menu, select the
correct audio output device
.
10.
Select the
version
of your audio output device that is preceded by DirectSound unless there is a specific reason to do
otherwise.
NOTE:
Headset operation is recommended however if only a standard PC Microphone and Speaker are available;
select these as the Headset / Primary Audio Device Microphone and Earphone/Speaker and leave the Select
Speaker drop down under Monitor / Secondary Audio Device at None.
NOTE:
In the Monitor / Secondary Audio Device group box, the secondary audio output device can be selected.
Typically this is an external speaker that allows monitoring the VLink/VLinkLE Control Panel even when
the headset is removed.
11.
From the Select Microphone drop down menu, select the
correct audio input device
.