RTS RTS ISDN 2002, Operator'S Manual

Page: 17 / 51

RTS ISDN 2002 System PAGE 6-17
Uninstall
After successful installation you will find now under START
→
PROGRAMME
→
RTS ISDN 2002: Icon for starting the RTS ISDN 2002 software.
For de-installation select the icon
6.4 Main panel RTS ISDN 2002 Commander
After starting the software the user will get displayed the main panel. The main
panel indicates the status of the
- PC connection
-
ISDN connection
-
Audio Codec operating modes
- Data channel interfaces
- Operating mode
In the main panel the telephone book for ISDN destination can be operated
and calls can be initiated.
For the different operating modes different panels are displayed.
6.4.1 Operating Mode 1: Telephone to key panel
Mode 1 supports communication with standard telephone units and transmits
the received DTMF tones to the Telex Intercom equipment for remote control.
6.4.1.1 Mode 1: Main panel
All necessary settings for Audio Codec 1 and Audio Codec 2 are indicated in a
common panel.
•
The field PC INTERFACE displays the selected COM port and the status
the connection ( CONNECTED or NOT CONNECTED ).
•
In the field ISDN the Connection State shows the status of the connection,
such as CONNECT , INCOMING_CALL , NOT_CONNECTED
•
Connected calls can be disconnected using the Drop button or incoming
calls can be accepted selecting the Accept button or rejected selecting the
Reject button.
•
The selection of the BOOK button opens a Telephone Book stored on the
PC
•
In the Field AUDIO the coding algorithms of the Audio codecs (G.711 3.1-
kHz ) and the status of the AGC and Echo Canceller ( enabled or dis-
abled ) are displayed
•
In the field DATA ( Interface/Addr .)the RS485 data interface together with
its address for codec 1 and 2 are indicated
•
Operating mode shows Telephone for Mode 1