OMNEO Configuration
Notes
DHCP Relay should be checked when using the MCII-e as the DHCP Server and running more than
one subnet. E.g. if you have 4 x OMI cards in a matrix, all on different subnets. Normally the MCII-e
would only be assigned to one subnet. By checking the DHCP Relay box this allows the MCII-e to issue
the defined DHCP addresses to the other 3 subnets. A maximum of 8 different subnets can be
created.
4
6.
To set the MCII-e controllers to provide DHCP go to
Options\DHCP Server Configuration
.
Check the
Enable DHCP Server
box and enter the range for the addresses in the
First IP
Address
and
Last IP Address
fields. Enter the gateway information if applicable and the
netmask.
7.
Connect your keypanel OKI module/s to the network. Under the
Menu\Service\OMNEO
Setup\OKI
item you can set the device name, enable or disable DHCP and set the IP
parameters. Enable DHCP or set a fixed IP address, netmask and gateway under IP
Parameters. You can also change the device name in IPedit.
