Help File
h u n k s
Intercoms Status Sort Screen Log options Master
On-Line
Mode: On-Line
I
Figure
Typical Intercom Status Screen
The
displayed in the "Config" column indicates intercom status as follows:
Bad Off
Indicates that there has never been any data communication with this intercom
system during the current edit session. Possible causes of a "Bad Off"
indication are
an
incorrect
port
assignment or baud rate setting (Intercoms
menu, "Setup"), a deactivated intercom system, or a
cable from the intercom system to the Trunking Master Controller,
Bad Cut
Indicates that there was an intercom system at the port at some time during the
current edit session, but
it
is not now transmitting data.
Ok
...
Indicates that an intercom system
is connected and transmitting data. If
"Ok"
is
followed by a question mark
this indicates that the intercom system
controller has an earlier version of software.
Status, Standby
TM
When you select this item, you will be presented with the status screen for the Standby
Trunking Master Controller (Figure 3-5).
3-8
CStrunk
User Manual
