Проверил: Р.Ч./24.03.2015г
- 4 -
To fit the blade, rotate the blade locking collar in clockwise direction..
Slide the blade into the locating groove with teeth pointing forward. Ensure the blade rollaer
guide is in contact with the back edge of the cutting blade at all times.
Release the locking collar to secure the blade.
Universal blade locking equipment is available for all saw blades in market.
SWITCH ON/OFF
Switching on: Press the on- off switch
Switching off: Release the on- off switch
.
CONTINUOUS OPERATION
Push the variable speed switch trigger and at the same time push the continuous operation lock
button .
The stop continuous operating, push variable speed switch and then release.
STROKE SELECTING
With the thumbwheel, the required stroke rate can be selected(also while running).
1 – 2 : Low stroke rate
3 – 4 : Medium stroke rate
5 – 6 : High stroke rate
DUST VACUUMING WITH THE EXTERNAL EXTRACTOR DEVICE
Dust extraction prevents large accumulations of dust, high concentrations of dust in the ambient air
and facilitates disposal.
For long periods of working with wood or for commercial use on materials that produce dust that is
detrimental to health, the machine is to be connected to a suitable external dust extraction device.
PENDULUM ACTION SETTING
The saw blade pendulum action that is adjustable in four steps makes possible the optimum adaptation
of sawing advancin(cutting speed) , cutting performance and cut appearance of the material to be worked.
For each downward movement, the saw blade is lifted off the material which facilities sawdust ejection
reduces heat generated by friction and increases the service life of the saw blade. At the same time the
reduction of the necessary advancing force makes fatigue-free working possible. The adjustment lever
makes possible the adjustment of the pendulum action in four steps. The switching can take place with the
machine running.
Step 0:
No pendulum action
Step 1:
Small pendulum action
Step 2:
Medium pendulum action
Step 3:
Large pendulum action
The following basic recommendations are to be observed:
The finer and cleaner the cut edge should be, the smaller the pendulum step selected should be
or switch off.
