RTRMAX RTM313, Quick Start Manual

Page: 4 / 9

FUNCTIONAL DESCRIPTIONS
MOUNTING AND DISMOUNTING BIDS
Changing bits
Take the locker out of the locking sleeve in order to dismount the bit. Separate the bit from
the bits holder with a wrench. For mounting the bids, insert bit into the holder firmly, and
insert the locker into locking sleeve firmly.
The function of switch and reverse it
In order to run your machine by clockwise, set the rotate switch to ‘ R ‘ position; to run by
reverse, set the rotate switch to ‘ L ‘ position. Before every use, please take look at the
direction of rotation. Use reverse switch while the tool is turned off. Otherwise, this could
harm your power tool.
OPERATION
You can push on the trigger to run the tool and by doing pushing on the trigger opposite way
you can stop running the tool. You can also speed up the tool by setting it to position of ‘+
‘and speed down by setting it to ‘ – ‘. When you would like to stable the speed, use the
locking button placed on the side of the tool.
ADJUSTMENT OF DEPTH
By turning locking sleeve, you can set the depth.
CLEANING AND MAINTENANCE
Before operating and maintenance on the tool, make sure it is unplugged. Keep the tool and
van holes clean for ultimate performance while running the tool.
CHANGING THE CARBON BRUSHES.
Keep checking carbon brushes periodically. The both of carbon brushes must be changed
together. Despite the care taken while the mass production and testing methods, If the tool is
broken down, all the maintenance have to be held by an authorized RTRMAX service.