RTRMAX RTM313, Quick Start Manual

Page: 3 / 9

The voltage of the power source must agree with the value given on the nameplate of the
machine.
Before using the tool, check the tool and it’s power connections if there is any damagement.
Don’t connect the plug to power source when switch is on.
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
Extreme temperature differences cause water droplets on power conducting parts . Before
switch on the tool, wait tool to get same temperature working room temperature.
Fit work pieces and for fitting the work pieces, use clamping equipment’s or vice.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts. Loosing clothes, jewelry or long hair can be caught in moving parts.
Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used for appropriate.
When working with the machine, hold it firmly with both hands and provide for a secure
stance.
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of electric shock.
Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
When power tool is given to other people, this instruction manual must be given with power
tool.
Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
•Keep the tools out of reach of children.
•Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool.
• Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventative safety measures reduce the risk of
starting the power tools accidentally.
•Never use the cord for carrying, pulling or unplugging the power tool.
• Don’t switch off the tool when it is under load.
•Keep work area clean and well lit. Cluttered and dark areas invite accidents.
•Avoid the abnormal body moving, when operating the tools.
•Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carry
power tools with your finger on the switch or plugging in power tools that have the switch on
invites accidents.
•Avoid to stop very often during the working, because it damages the battery.
•While operating with the tool, try to avoid to contact with hot gun.
•While operating with plastic dye, or other related materials, hazardous gases can expose. Be
careful for flaming risk.