8/23
Проверил: Р.Ч./19.03.2015г
WARNING! Danger of injury! Never pull the trigger guard while adjusting the air
cap.
12.
3. Spray Technique
●
The spray result depends heavily on the smoothness and cleanliness of the surface to be
sprayed. Therefore the surface should be carefully prepared and kept free of dust.
●
Cover all surfaces not to be sprayed.
+
-
Adjusting the Material
Volume
Set the material
volume by turning the
regulator on the rear
part of the spray gun.
A scale on the
regulator serves as a
guide:
+ turn to the right
➟
higher material volume
- turn to the left
➟
lower
material
volume
Attention:
Only one direction
is applicable when
changing setting.
Do not force or
will cause
damage!
a) Change
horizontal flat
jet to Vertical.
Counter
clockwise
rotate
the
changing
button 90
°
.
b) Change
Vertical flat jet
to
horizontal.
Clockwise
rotate
the
changing
button 90
°
.
The
changing
button can only be
rotate
at
one
direction.
b)
a)