4
Introduction
Chassis
The RTP3000 TAS series provides 4 separate chassis configurations. Single power supply
configurations include the 19-slot, 11-slot, and 6-slot chassis. Dual power supply configurations include
the 15-slot configuration. The number of available I/O slots is dependent upon the number of processors
in the chassis.
The physical configuration of the RTP3000 TAS system must match the software configuration created in
the NetArrays project’s I/O Configuration file. The two CPU Node configurations are TAS Node or
3200TNode. Refer to the NetArrays Help or the NetSuite Software User Guide for information on I/O
configuration.
All chassis configurations include a fan assembly.
TAS Nodes
A TAS Node can contain up to four
3000/06
Node Processors and one or two
3000/01
Chassis Processors. Based on your processor configuration, you can have up to 17 I/O
slots available in the chassis. I/O cards can be installed in slots 1 through 17, which
correspond to slots 01 through 17 in the NetArrays I/O Configuration form.
All chassis configurations can also be used as an expansion/remote chassis. These
chassis will contain either one or two
3000/01
Chassis Processor, but do not include the
3000/06
Node Processor. You can install I/O cards in slots 0 through 17 based on
chassis processor and power supply redundancy.
Standalone systems are also available in all chassis configurations. These chassis will
include one
3000/01-M
Micro Processor. You can install I/O cards in slots 0 through 18
based on power supply redundancy.
