Realtimes Beijing Technology Co.,LTD
www.realtimesai.com
RTSO-6002 Product Manual V2.0
12
3.3 usage
a) Ensure all external system voltages are turned off
b)
Install the Xavier NX/TX2 NX core module on the 260 PIN SO-DIMM connector. During the
installation process, please pay attention to the alignment between the connectors, apply uniform
force, and install the fixing screws.
c)
Install the necessary external cables. (e.g. : the display cable that connects to the HDMI monitor, the
power input cable that supplies power to the system, the USB cable that connects the keyboard
and mouse...)
d)
Connect the power cord to the power supply.
e)
RTSO-6002 adopts automatic/manual power-on design, turn on the power, and the system starts to
work.
f)
For the system without protective shell, please avoid moving the whole system after the system is
powered on, and it is strictly forbidden to touch the circuit board and its electronic components
with your body.
3.4 Recovery MODE
Jetson Xavier NX/TX2 NX core module can work in normal mode and Recovery mode, in which
file system update, kernel update, boot loader update, BCT update and other operations can be
performed.
Procedure to place system in Force USB Recovery Mode:
a) Power down the device.
b) Use USB cable to connect RTSO-6002 OTG-USB port (P4) with Jetson to develop host USB port.
c) Press the Recovery button and do not release it. Power supply to the system will be maintained for
more than 3 seconds, and then release the Recovery button
d) The system enters the Recovery mode, and subsequent operations can be carried out at this time.
