RTI ZM-24, Installation And Operation Manual, Page: 9 / 22

9
It’s Under Control
®
Thank you for using the ZM-24 Zigbee® Transceiver Module.
The ZM-24 Transceiver Module provides bi-directional communication
between two-way enabled RTI remote controls and control processors
utilizing Zigbee
®
wireless communication. Capable of being configured in
two different modes, the ZM-24 can be hard-wired directly to a control
processor as the coordinator or be used as a wireless repeater device to
create an ultra-reliable, self-healing “mesh” network.
Utilizing the latest in wireless technology, the ZM-24 Zigbee
®
Transceiver
Module is capable of more than just receiving signals - it can transmit
signals as well. This creates a bi-directional communication link between
Zigbee
®
enabled RTI control processors and handheld remote controls.
Feedback, such as song meta-data or volume level from supported devices
can now be viewed on the remote control. The ZM-24 is easy to install,
since only one module needs to be hardwired to the control processor.
This device becomes the “coordinator,” while additional “repeater” modules
can be added by simply powering them from any electrical outlet within
communication range of other modules. The ZM-24 units will then create a
self-healing “mesh” network which adapts to changes or problems with the
communication path.
IMPOrTanT nOTes
Please read these important notes about the ZM-24:
The ZM-24 should be placed in an area where it is around normal
room temperature (between 60°F to 90°F).
Avoid installing the ZM-24 in a location where it can come in contact
with direct sunlight.
Do not let the ZM-24 get wet. It should not be handled with wet hands
or placed in an area where it could get wet.
Do not subject the ZM-24 to smoke, dust, or vibrations.
Do not disassemble the unit. Service of the ZM-24 should be
performed by authorized personnel only.
Contents within the box include the following items:
One (1) ZM-24 Radio Frequency Receiver Module.
One (1) 1/2-wave whip antenna.
One (1) 10 ft. (3m) hook-up wire.
One (1) operation manual.
unPaCKInG and InsPeCTIOn
After unpacking your new ZM-24 Zigbee
®
Transceiver Module, save all of
the packing materials in case you ever have to ship the unit.
Thoroughly inspect the ZM-24 and packing materials for signs of damage.
Report any damage to the carrier immediately. Report any equipment
malfunctions to RTI or an authorized RTI distributor.
CHaPTer 1 | WelCOMe