RTI ZM-24, Installation And Operation Manual, Page: 17 / 22

17
It’s Under Control
®
If you are having problems with your ZM-24 Transceiver Module, please
read the information below before contacting technical support.
If you continue to have problems, see Chapter 7 for more information on
contacting RTI technical support.
The Data LED is constantly flashing red.
This does not necessarily indicate a problem that will effect
performance. If it does, move the ZM-24 to a different area.
The data led never turns green.
Make sure the ZM-24 is wired correctly to the central control system,
and verify the control system is powered-up.
Make sure the RTI universal system controller is programmed to
output RF data.
The data led turns green when it receives a command, but the
control system does not respond.
If there is also an infrared repeater connected to the control system,
make sure it is not injecting noise onto the signal line.
Make sure the programming in the central control system matches the
universal system controller.
CHaPTer 5 | TrOublesHOOTInG