![background image](http://html1.mh-extra.com/html/rti/vfx-124/vfx-124_user-manual_1497720040.webp)
Single Plug-in Card Matrix Switcher
33
Controlled by PC(s) in LAN
Connect the matrix switcher, a router and several PCs to setup a LAN (as shown in the
following figure). Set the network segment of the matrix switcher to the same as the
router’s, then PCs within the LAN are able to control the matrix switcher.
Follow these steps to connect the devices:
Step1.
Connect the TCP/IP port of the matrix switcher to Ethernet port of PC with
straight-thru CAT5e/6.
Step2.
Set the PC’s network segment to the same as the matrix switcher’s.
Step3.
Set the matrix switcher
’s network segment to the same as the router.
Step4.
Set the PC’s network segment to the original ones.
Step5.
Connect the matrix switcher and PC(s) to the router. PC(s) within the LAN is
able to control the matrix switcher asynchronously.
Router
Internet
PC
CAT5e
TCP/IP