RTI ACF-3000, Operation Manual

Page: 6 / 13

Page 5
Solvent
Filling Cap
CONTROL VALVE
L
S
OFF
O
W
Y
L
PURGE
FLUSH
SELECTOR VALVE
PURGE
FLUSH
ACF 3000
-
Flush
1. Verify that both the RTI Spin-on Filter and the Coalescing Filter are installed.
2. Turn the Control Valve to OFF.
3. Remove the solvent filling cap and pour one
gallon (3.6 liters) of RTI Flush Solvent into the
ACF internal tank. Replace the solvent filling cap
when done.
4. Install proper adapter fittings on the inlet and
outlet ports of the component to be flushed and
connect ground strap to adequate ground on
vehicle. (see page 4 for Adapter Instructions)
5. Connect the Line with the Red “IN” (inlet) label to
the inlet adapter fitting on the component.
Connect the Line with the Black “OUT” (outlet)
label to the outlet adapter fitting.
6. Connect shop air to Shop Air Coupler (with a
minimum pressure of 90 psi).
7. Turn the Selector Valve to FLUSH.
8. Turn the Control Valve to FLUSH.
9. Flush the component for a minimum of 15 minutes to ensure a thorough cleaning.
10. Turn the Control Valve to OFF to end the flushing procedure.
The component is now ready to be purged.