RTI ACF-3000, Operation Manual

Page: 5 / 13

Page 4
Adapter Instructions
Straight Adapter
1. Choose the appropriate size main bracket for the
fitting on the vehicle.
2. Screw straight fitting (3) into selected bracket (4).
3. Select the proper neoprene seal (2) and place on
fitting (3) .
Note: There are various size seals to cover all
vehicle applications.
4. Slide the adapter onto the vehicle fitting and tighten.
Warning: Do not over tighten.
5. Connect the ACF Hose Coupler.
90 Degree Adapter
1. Choose the appropriate size main bracket for the fitting on
the vehicle.
2. Connect the 90 degree fitting (5) in the selected bracket (3).
3. Connect the knob screw (2) loosely.
4. Select the proper neoprene seal (4) and place on 90 degree
fitting (5).
Note: There are various size seals to cover all vehicle
applications.
5. Slide the adapter onto the vehicle fitting.
6. Tighten flush locking screw (1) then tighten knob screw (2).
Warning: Do not over tighten.
8. Connect the ACF Hose Coupler.
Collar Adapter
The collars are used for Flare Spring Lock Fittings for
added protection.
1. The collar (5) is placed around the outside diameter
of the fitting form the vehicle (1).
2. The 90 degree fitting (5) or straight fitting (3) along
with the selected bracket (2) is attached to the
vehicle. (Refer to the sections above)