RTD Embedded Technologies, Inc.
|
www.rtd.com
6
BRG2110 User’s Manual
1
Introduction
1.1
Product Overview
The LAN24710 and LAN34710 are dual 10Gb/s Fiber Ethernet Modules. They provide two independent 10Gb/s fiber
Ethernet connections using a single integrated controller chip. Fiber connectivity is provided by standard SFP+
modules (specific modules listed below have been validated by RTD to work with the LAN24710 and LAN34710).
These boards run completely off of th
e PCI Express bus, utilizing Intel’s X710 10 Gigabit Ethernet controller.
The LAN24710 is the PCI/104 Express version that has a pass-through PCI connector.
1.2
Board Features
•
PC/104 form factor
•
PCIe x4 Gen3 Interface
•
PCIe/104 stackable bus structure
o
PCIe Type 2 expansion bus
o
PCI pass-through expansion bus (LAN24- versions only)
•
2 Independent 10Gb/s Fiber Ethernet Connections
o
Intel X710 controller chip
o
SFP+ module sockets to support the following standards:
▪
10GBASE-SR
▪
10GBASE-LR
▪
SFP+ Direct Attach Cable
o
Backward compatibility with 1Gb/s standard
•
10/1 GbE data rate per port: support for vision systems, network and server virtualization, and LAN and SAN flexibility
•
Connector for LEDs to monitor Link Status and Activity for each port
1.3
Ordering Information
The LAN24710/LAN34710 is available with the following options:
Table 1: Ordering Options
Part Number
Description
LAN24710
PCI/104 Express - Dual 10Gb/s Fiber Ethernet Controller
IDAN-LAN24710 Dual 10Gb/s Fiber Ethernet Controller in IDAN enclosure
LAN34710
PCIe/104 Dual 10Gb/s Fiber Ethernet Controller
IDAN-LAN34710 Dual 10Gb/s Fiber Ethernet Controller in IDAN enclosure
The Intelligent Data Acquisition Node (IDAN™) building block can be used in just about any combination with other
IDAN building blocks to create a simple but rugged 104™ stack. This module can also be incorporated in a custom-
built RTD HiDAN™ or HiDANplus High Reliability Intelligent Data Acquisition Node. Contact RTD sales for more
information on our high reliability systems.
