rtd DM5816, User Manual

Page: 10 / 44

DM5816/DM6816 RTD Embedded Technologies, Inc.
10
Chapter 1 – Module Settings
The DM5816 has jumper and switch settings you can change if necessary for your application. The module
is factory-configured as listed in the table and shown on the layout diagram in the beginning of this
chapter. Should you need to change these settings, use these easy-to-follow instructions before you stack
the module with your computer system.
Factory-Configured Switch and Jumper Settings
Table 1-1 lists the factory settings of the user-configurable jumpers and switch on the DM5816 module.
Figure 1-1 shows the module layout and the locations of the factory-set jumpers. The following
paragraphs explain how to change the factory settings. Pay special attention to the setting of S1, the
base address switch, to avoid address contention when you first use your module in your system.