RTA Techni Mobili RTA-8807, Assembly Instructions Manual, Page: 7 / 16

Use screws
④
to assemble the plastic bases
⑫
to the panels
Ⓓ
and
Ⓔ
.
STEP 5
Hardware:
❹
3.5x15mm 8
Pcs
⓬
Base
4
Pcs
STEP 6 Separate all the sliders pieces
⑰
according to their shape (no assembly is done here):
-The “Flat” ones go on the side panels of the unit and will be used on the next step.
-The “L” shaped go on the drawers and will be used until step 24, please set them aside.
“FLAT”: Use on next step
“L shaped”: Use until step 20
(2 Sets, total 8 pcs:
4 flats, 4 L shaped)
RIGHT
RIGHT
LEFT
LEFT
Using screws
③
, and paying close attention to the orientation of the parts, assemble:
• One of the right flat sliders
⑰
to the plastic bases
⑫
on panel
Ⓔ
.
•
One of the left flat sliders
⑰
to panel
Ⓛ
.
• The remaining flat sliders
⑰
to panel
Ⓖ
on both sides of the panel.
STEP 7
Screws:
❸
5x8mm 8
Pcs
⓱
Flat
sliders
2 Left
2 Right
Flat, Right
Flat, Left
Flat, Left
Flat, Right
Attach the sliders on both sides.
P.7 RTA-8807 P.7
(Use 2 screws)
(Use 2 screws)
(Use 2 screws)
(Use 2 screws)
ON ALL THE SLIDERS THE WHEEL
FACES DOWN AND TOWARDS THE FRONT