RTA 490NBX-NNA1 Product User Manual Download Page 35

Page: 35 / 43

Real Time Automation, Inc.

1-800-249-1612

Save and Replace Configuration using SD Card

This function

saves the gateway’s configuration to an SD Card. If the SD card is placed in another unit

the configuration on the SD card will automatically populate the gateway on power up.

This SD Card replaces every configurable field in the gateway,

INCLUDING

IP Address, Subnet Mask, and

Default Gateway.

Data Transfer To/From SD Card

Data is written

the SD Card if no current configuration is found on the SD card and when a

configuration change is saved.

Data is written

from

the SD Card upon power up. If the SD Card contains a configuration that differs in

any way from the configuration already in the gateway the configuration from the SD card will be
applied.

NOTE

: When data is being written from the SD Card to the gateway, it will take up to 30 seconds for the

data transfer to be completed. During this time, the gateway cannot be accessed via the webpage.

Using IP Setup with SD Card

When an SD Card is present and an IP Address is modified through IPSetup.exe, a popup will appear
after the Set

→

button is pressed. This is intended as an extra precaution to ensure that the IP Address

should be modified from what is currently stored in the SD Card.

Enter a UserName of RTA.

Enter a Password of RTA.

Press OK.

This will then update the IP Address of the gateway and the SD Card with what was set through
IPSetup.exe.

Summary of Contents for 490NBX-NNA1












































Search results

Summary of Contents for 490NBX-NNA1

Reviews:

Related manuals for 490NBX-NNA1

Brands by name

Popular brands

RTA 490NBX-NNA1, Product User Manual

Search results

Summary of Contents for 490NBX-NNA1

Reviews:

Related manuals for 490NBX-NNA1

Brands by name

Popular brands