RTA 460A Product User Manual Download

Page: 63 / 72

Real Time Automation, Inc.

1-800-249-1612

Device Status

- This will only display when viewing

All ASCII

Connected and Running

–

The gateway is connected to all the ASCII devices and data is being

received/transmitted.

Not Connected

–

There have been no messages received or transmitted.

Verify that the serial /TCP/IP/USB settings match your device.

Fatal Error: Hardware Port Not Configured

–

The port selected on the ASCII Configuration page is not

configured.

Verify the ASCII device is enabled and configured.

Verify the port configured matches the port enabled.

LED Status

- This is the Status for

All ASCII

or the specific ASCII device selected.

Solid Green (Connected)

–

The gateway is receiving/transmitting data within the inactivity period for

all the ASCII devices that are configured and enabled.

Flashing Green (Not Connected/First Time Scan)

–

Start up state. No messages have been received

or transmitted, but port is connected.

Flashing Red (Connection Timeout)

–

The only way to exit this state is with a valid received message.

Data has been discarded due to the queue being full.

Data has not been received/transmitted within the inactivity period.

Port not opened.

Message parsing has failed.

Summary of Contents for 460A









































































Search results

Summary of Contents for 460A

Reviews:

Related manuals for 460A

Brands by name

Popular brands

RTA 460A, Product User Manual

Search results

Summary of Contents for 460A

Reviews:

Related manuals for 460A

Brands by name

Popular brands